Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
In M&K's constant strive to be the BEST “go-to-speakers” for Home Cinema installations they have developed the real NO Compromise Bass machine.
Introducing the C15S Custom Install Subwoofer. Designed for custom installations
Product Ref: 210527
In M&K's constant strive to be the BEST “go-to-speakers” for Home Cinema installations they have developed the real NO Compromise Bass machine.
Introducing the C15S Custom Install Subwoofer. Designed for custom installations.
Packaged with the C15S is this dedicated Class D amplifier with high efficiency, cool running and low standby voltage consumption is a further development of the amplifiers built into the popular Miller & Kreisel V Series subwoofers.
The C15S builds on the technology of the X-Series and V-Series subwoofers and goes BIG. With output on par with the dual 10” X-10 subwoofer (without the advantages of Push-Pull) in a single driver enclosure, the C15S is designed to enhance custom and large installations.
Utilizing a specially tuned VA-500 amplifier, the entire system was custom designed from the ground up to reproduce the deepest notes at levels loud to be heard and felt.
The Class D switch mode power module is designed with effective power reserves to effortlessly deliver copious amounts of clean power to the C15S sub for extraordinary, uncompromising handling of demanding deep bass transients
Nominal System Impedance | 4 ohm(Z-min 3.4 ohm) |
---|---|
Frequency Response | 22-200Hz +/-3dB (average response in room +/- 3 dB) |
Frequency Roll Off | 20 Hz (-6 dB 20 Hz near field) |
Crossover FrequencyVariable | 60-200Hz (VA500Blue) |
Tweeter | NA / NA |
Woofer | 1 x 15″ Ultra-Stiff Paper Pulp with fiberglass dustcap |
Power Handling | 800 watt Long term IEC-268-5 (cycled input 77-20K Hz) |
Power Handling | 500 watt Rated IEC-268-5 (constant input 77-20K Hz) |
Recommended Amp Power | VA500 Blue |
Sensitivity | 91dB Drive Signal 100mV VA500 Blue Input |
Max SPL Continued | 118 dB Sinewave 40-200Hz / THD 10% |
Max SPL Peak | 121 dB Sinewave 40-200Hz / THD 10% |
System Principle | Sealed Full 1’’ MDF enclosure |
Finish | PaintBlack Vinyl |
Cutout | H x WNA |
Accessories | 2 x ‘’Brass Brace’’ Rigid Bracket 2 x Stacking Couple Straight Brackets 4 x Rubber Feet 4 x Foam Protectors |
Cabinet dimensions H x W | 28.54 x 19.60 inch / 725 x 498 mm |
Cabinet depth D | 11.73 inch / 298 mm |
Dimensions Grille | H x W x DNA |
Weight | 71.6 lbs / 32.5 kg |
Amplifier Power | 500W RMS / 800WPeak |
---|---|
System Preamp | Analog |
THD | 0.5% @ 500W |
AC Power | 100-240 VAC 50/60Hz |
Inputs | Line Level RCA L/R |
Outputs | Line Level RCA L/R |
EQ Switch3-Position Room Adaptation | 1 Centre of Wall 2 Near a Corner 3 Placed in a Corner |
Controls | Volume, Phase, Crossover |
Input Voltage | 100-240 VAC (switchable), Auto On/Off |
Dimensions W x H x D | 429 x 44,4 x 224 mm |
Dimensions W x H x D Rack size | 483 x 44,4 x 224 mm |
Weight | 8.8 lbs / 4 kg |