The Emotiva XPA Gen3 Power Amp is a modular AV power amplifier that can be configured from 2 - 11 channels and upgraded over time by adding modular amplifier stages. The new XPA Series utilises a high-current switch mode power supply. It's a power supply capable of delivering over 3Kw of continuous power with absolute reliability and extremely high efficiency. It shares the dynamic attributes of a classic transformer-based design with none of the downside. It's lightweight, intelligent, and extremely powerful!
41826
Brand-new, unused, unopened and undamaged item in original retail packaging (where applicable).
New
Limited 5 year warranty. More info
Limited 5 year warranty. Please see manufacturers website for full details.
After purchase we will contact you to organise a suitable delivery date with our two man 'white glove' service.
Please provide your email address and we will remind you when "Emotiva XPA Gen3 Black Modular Power Amplifier (3 Channel)" is back in stock.
The Emotiva XPA Gen3 Power Amp is a modular AV power amplifier that can be configured from 2 - 11 channels and upgraded over time by adding modular amplifier stages. The new XPA Series utilises a high-current switch mode power supply. It's a power supply capable of delivering over 3Kw of continuous power with absolute reliability and extremely high efficiency. It shares the dynamic attributes of a classic transformer-based design with none of the downside. It's lightweight, intelligent, and extremely powerful!
The new XPA Series amplifiers are fully modular and configurable at the time you order them. You can choose any configuration you want, from two to seven channels. All configurations are built on the same chassis, sharing one very robust power supply. If your needs change in the future, you can easily have more channels added. With the new XPA Series amplifiers, you dont have to buy another amplifier when you’re perfectly happy with your current one, but you need a few more channels.
True audiophile-quality sound with a wideband, low distortion amplifier design
Fully modular construction using Top quality parts and construction
Heavy steel 4RU chassis with milled aluminum faceplate
Choice of balanced or unbalanced inputs
Audiophile-grade fault protection
Full five-year warranty
Remote trigger input and output
Solid machined gold-plated RCA input connectors
Gold plated five-way speaker binding posts with clear shields
Optimized Soft-Switch Class H™ power supply topology with Switched Mode Power Supply (SMPS)
The Emotiva XPA Gen3 amplifiers aren't just about power and impact. Behind the massive power supplies are audiophile-grade amplifier modules, built using premium components. Using the finest materials and the latest technologies to bring you world-class products. They are carefully engineered and designed to work together as stunningly capable, reliable, and refined systems.
The XPA Gen3 modular power amplifier is comprised of a heavy-duty chassis, which houses the oversized power supply, and up to seven amplifier modules. The XPA Gen3 can be purchased with anywhere between two and seven amplifier modules installed, and additional amplifier modules may be installed as more channels of amplification are needed.
A high-efficiency switch mode power supply (SMPS) design with independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.
Our highly regarded Soft-Switch™ Class H power supply topology increases the efficiency of the new XPA amplifiers without compromising the audio performance you'd expect from an Emotiva amplifier. At lower power levels, the amplifiers operate on a lower supply voltage to minimize quiescent power consumption and standby power losses. When the amplifier control circuitry detects a fast rising input signal that will exceed the lower power voltage, it instantly switches to a higher voltage rail to ensure that the signal can pass cleanly without clipping. This process happens on a continuous basis, in real time, and it allows much greater overall efficiency than previous designs. In actual operation, the XPA amplifiers are cool running, which contributes to much longer component life, reduced power consumption, and increased reliability.
| ALL MODELS: Power Output Per Channel | 300 watts RMS per channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms 550 watts RMS per channel; 20 Hz - 20 kHz; THD < 0.2%; into 4 Ohms 800 watts RMS per channel; 20 Hz - 20 kHz; THD < 0.5%; into 2 Ohms |
|---|---|
| ALL MODELS: FTC Rated Power 2 Channels Driven; 20 Hz - 20 kHz; THD <0.1% |
300 watts RMS per channel; THD < 0.1%; into 8 Ohms (120 VAC line) 490 watts RMS per channel; THD < 0.1%; into 4 Ohms (120 VAC line) |
| XPA Gen3 Power Per Channel: All Channels Driven THD <0.1% ; into 8 Ohms |
Two : 300 watts RMS per channel Three : 275 watts RMS per channel Four : 260 watts RMS per channel Five : 250 watts RMS per channel Six : 225 watts RMS per channel Seven : 200 watts RMS per channel |
| Power Bandwidth (at rated power; 8 Ohm load) | 20 Hz to 20 kHz (+ / - 0.1 dB) |
| Broad Band Frequency Response | 5 Hz to 80 kHz (+ 0 / - 0.15 dB) |
| THD + noise | < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms |
| Signal to Noise Ratio (8 Ohm load) | > 117 dB; ref FTC rated power; unbalanced input (A-weighted) > 91 dB; ref 1 watt; unbalanced input (A-weighted) |
| Minimum Recommended Load Impedance | 4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads |
| Damping Factor (8 Ohm load) | > 500 |
| Speaker Output Connections | Audiophile grade, gold plated, 5-way binding posts |
| Power Supply | High efficiency, audiophile grade, Switch Mode Power Supply (SMPS) |
| Input Sensitivity (for rated power; 8 Ohm load) | 1.5 V |
| Gain | 29 dB |
| Power Requirements | Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected) |
| Protection | The XPA Gen3 is protected against excessive operating temperature shorted speaker connections, ground faults, and other common fault conditions |
| Input Connections | Unbalanced (RCA); balanced (XLR); one each per channel independently selectable |
|---|---|
| Input Impedance | 33 kohms (balanced) 23.5 kohms (unbalanced) |
| Trigger | Trigger Input: 5 - 12 V (AC or DC); <10 mA input current required Trigger Output: 12 VDC; can drive any load up to 120 mA |
| Front Panel Controls and Indicators | Standby; push button (halo ring changes colour to indicate Standby or On) Status LEDs; one per channel; blue Status LEDs change to red to indicate a fault condition |
| Rear Panel Controls | AC Power switch; rocker switch (switches AC main power) Status LEDs switch; disables front panel Status LEDs and dims Standby button halo Input selector switches (one per channel); metal toggle switches select between balanced and unbalanced inputs Circuit Breaker; press button to reset circuit breaker |
| Dimensions | 17” wide x 8” high x 19” deep (unboxed; including feet) 17” wide x 7” high x 19” deep (unboxed; without feet) 24-1/2” wide x 12” high x 24-3/4” deep (boxed) |
| Weight | 39 lbs (unboxed) For boxed weight, add 5 lbs |
| Warranty | 5 years |
Looking to upgrade and not sure what to do with your old gear? Trade-in with us and take the hassle out of finding a new home for your equipment.
We can take back any type of product we sell, from cables, to projectors, speakers, amplifiers, AV receivers, subwoofers and more.
Just fill in the form below and we'll get back to you.
Please note we don't purchase second hand goods for cash, we take trade-ins as part payment towards the purchase of new equipment.
Buy Now, Pay Later: Get 4 months 0% finance when you spend £99 or more. Look for the PayPal Credit button when making your purchase.
More information on PayPal Credit is available here.
Pay monthly plans for up to 48 months, available on purchases between £299 and £25,000.
Deposit variable between 10% and 50%, subject to a minimum loan value of £250.
Please note: These finance quotes are for a single purchase of the product listed on this page, at the price shown. Adding additional products or quantities to your order, or using any vouchers or other discounts will result in changes to the quotes and available terms.
For further information please visit the finance page.
All of our reviews are provided by real customers with verified purchases.
Reviews for this product.
Anonymous
Anonymous
Reviews for other available options.
Ayub mohammad
Stock information not available for this product, please contact us for more details.
Please see our stock information page for more details on how we show stock information on this website.
When in stock:
This item is available dispatch Monday to Friday, subject to cut-off times and excluding public holidays. Next working day and weekend deliveries available.
Delivery is available to most addresses within the United Kingdom. Some services may not be available to all postcodes. More information is available at the basket and on our delivery page.
We do not dispatch orders to addresses outside of the United Kingdom.
Provision to connect a variety of legacy devices.
This unit features XLR sockets for superior true balanced connectivity. XLR plugs and sockets also feature locking mechanisms for a more secure connection.
