Arrow
Lines open 01706 878444
Exclusive Deals
Continue

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the AudioVisual Online website. Here is how we use cookies.

Home Accessories Electronics Speaker Switching Units

Speaker Switching Units

A range of products designed to switch between multiple speaker pairs by using one source. A great option for multi-room audio on a more modest budget.
QED SS22 Series 2-Way Speaker Switching Unit

QED SS22 Series 2-Way Speaker Switching Unit

A really neat speaker switching unit by QED which enables connection and switching of two pairs of loudspeakers (in series) from a stereo amplifier. The QED SS22 switching unit comes in a tidy two-tone anodised aluminium outer case with on / off switches at the front and silver-plated contacts at the rear. A popular choice with our home installation customers using in-ceiling and in-wall speakers.

A really neat speaker switching unit by QED which enables connection and switching of two pairs of loudspeakers (in parallel) from a stereo amplifier. The QED SS22 switching unit comes in a tidy two-tone anodised aluminium outer case with on / off switches at the front and silver-plated contacts at the rear. The curved anodised aluminium fascias and precision moulded buttons of QED's updated switching accessories give this new range a very contemporary look with excellent ‘shelf' appeal.

The QED SS22 is a popular choice with our home installation customers using in-ceiling and in-wall speakers. Enables connection and switching of two pairs of speakers (in parallel) from a stereo amplifier.

Benefits Of Series vs Parallel
The switches which have more than two sets of speakers use a combination of series and parallel switching to achieve the minimum impedance of 4 ohms no matter what combination of speakers are switched on. For the two way switches there is a choice between exclusively series or parallel versions. If you have 8 ohm speakers (and a 4 ohm min amp) you should always use the parallel switch. If you have 4 ohm speakers and a 4 ohm min amp you should always use the series switch.

How Do These Switches Deal With Powerful Amplifiers?
These accessories use mains switches which are rated at 6A which means the max power they can handle is 288W given an 8 ohm load

QED SS22 Speaker Switching Unit Features

  • Tick Safe series switching ensures impedance load does not fall below 8 ohms (using 8 ohm speakers for both pairs).
  • Tick Power rating: 150 Watts RMS.
  • Tick Silver-plated switch contacts.
  • Tick Large Cable Entry Protected Terminals (3.95mm dia)
£59.95
Systemline WM17 Two-Way Series Speaker Switch Wall Plate

Systemline WM17 Two-Way Series Speaker Switch Wall Plate

The QED AVEQ WM17 is a two-way speaker switch enabling you to connect and switch two pairs of speakers in series from one stereo amplifier from a control on the wall. Finished in pearl white for a nice, clean discreet finish. 

  • Tick Series switching ensures maximum safety for the amplifier
  • Tick Power rating 150 Watts RMS.
  • Tick NOT suitable for use with WM14 volume control
  • Tick Silver plated switch contacts
  • Tick Screw terminal connections
£84.95
Systemline WM15 Two Way Parallel Speaker Switch Wall Plate

Systemline WM15 Two Way Parallel Speaker Switch Wall Plate

The QED AVEQ WM15 is a two-way parallel speaker switch enabling you to connect and switch two pairs of speakers from one stereo amplifier from a control on the wall. Finished in pearl white for a nice, clean discreet finish. 

  • Tick Connect and switch two pairs of speakers from one stereo amplifier
  • Tick Parallel switching ensures maximum sound quality
  • Tick Using 8 ohm speakers the minimum load presented to the amplifier will be 4 ohms
  • Tick Power rating 150 Watts RMS.
  • Tick Suitable for use with WM14 Volume Control Switch
  • Tick Silver plated switch contacts
  • Tick Screw terminal connections
£115.00
Discontinued 11% Off Systemline WM16 In-Line Series Speaker Switch Wall Plate

Systemline WM16 In-Line Series Speaker Switch Wall Plate

The QED AVEQ WM16 is a two-way speaker switch enabling you to connect and switch two pairs of speakers in series from one stereo amplifier from a control on the wall. A great way of using one amplifier piping music through to two rooms. Finished in pearl white for a nice, clean discreet finish. 

  • Tick For "local" on/off speaker switching (series switching)
  • Tick Power rating 150 Watts RMS.
  • Tick Silver plated switch contacts
  • Tick Screw terminal connections
  • Tick Supplied complete with white plastic single gang facia & frame.
Was: £100.00 Now: £89.00
QED SS21 Parallel 2-Way Speaker Switching Unit (For Banana Plugs)

QED SS21 Parallel 2-Way Speaker Switching Unit (For Banana Plugs)

A really neat speaker switching unit by QED which enables connection and switching of two pairs of loudspeakers (In Parallel) from a stereo amplifier with binding posts that will accept standard banana plugs. The QED SS21 switching unit comes in a tidy two-tone anodised aluminium outer case with on / off switches at the front. A popular choice with our home installation customers with in-ceiling and in-wall speakers.

  • Tick Enables connection and switching of two pairs of speakers (in parallel) from a stereo amplifier
  • Tick Impedance loading both pairs on - 4 ohms (using 2 pairs of 8 ohms speakers)
  • Tick Power rating: 150 watts RMS
  • Tick Silver plated switch contacts
  • Tick Suitable for use with WM14 wall mounted volume control
  • Tick Suitable for bi-wiring (spade and banana)
£79.95
QED SS50 5 Way Transmatch Speaker Switching Unit

QED SS50 5 Way Transmatch Speaker Switching Unit

The Daddy! We always recommend using the QED SS50 if budget allows as its transmatch features mean simple switching with no worrying about impedance and amp loads. In fact we use the very same switch in our demo rooms. Enables connection and switching of up to five pairs of speakers from a stereo amplifier.

  • Tick Unique impedance matching design.
  • Tick ‘A’ pair switching direct for best sound quality. ‘B1’ to ‘B4’ Transmatch converts a net 2 ohms load back to 8 ohms for safe amplifier operation. Impedance loading with all pairs selected – 4 ohms (using five pairs of 8 ohm speakers.
  • Tick Power rating: 60 Watts RMS. Electronic overload protected.
  • Tick Silver-plated switch contacts.
  • Tick Large Cable Entry Protected Terminals (3.95mm dia)
£169.95
QED SS30 3-Way Speaker Switching Unit

QED SS30 3-Way Speaker Switching Unit

A really neat speaker switching unit by QED which enables connection and switching of three pairs of loudspeakers in a parallel or series configuration from a stereo amplifier. The QED SS30 switching unit comes in a tidy two-tone anodised aluminium outer case with on / off switches at the front and silver-plated contacts at the rear. A popular choice with our home installation customers using in-ceiling and in-wall speakers.

  • Tick Series/parallel switching ensures safe amplifier impedance loading, all pairs on - 4 ohms (using three pairs of 8 ohm speakers)
  • Tick Power rating: 150 Watts RMS.
  • Tick Silver-plated switch contacts.
  • Tick Large cable entry protected terminals (3.95mm dia)
£89.95
QED SS20 Parallel 2-Way Speaker Switching Unit

QED SS20 Parallel 2-Way Speaker Switching Unit

A really neat speaker switching unit by QED which enables connection and switching of two pairs of loudspeakers (in parallel) from a stereo amplifier. The QED SS20 switching unit comes in a tidy two-tone anodised aluminium outer case with on / off switches at the front and silver-plated contacts at the rear. A popular choice with our home installation customers using in-ceiling and in-wall speakers.

  • Tick Impedance loading both pairs on (using two pairs of 8 ohm speakers) – 4 ohms.
  • Tick Power rating: 150 Watts RMS.
  • Tick Silver-plated switch contacts.
  • Tick Large Cable Entry Protected Terminals (3.95mm dia)
  • Tick Screw terminals.
£69.95
QED SS40 4-Way Speaker Switching Unit

QED SS40 4-Way Speaker Switching Unit

A really neat speaker switching unit by QED which enables connection and switching of four pairs of loudspeakers in a parallel or series configuration from a stereo amplifier. The QED SS40 switching unit comes in a tidy two-tone anodised aluminium outer case with on / off switches at the front and silver-plated contacts at the rear. A popular choice with our home installation customers using in-ceiling and in-wall speakers.

  • Tick Series/parallel switching ensures safe amplifier impedance loading, all pairs on (using four pairs of 8 ohm speakers) – 4 ohms.
  • Tick Power rating: 150 Watts RMS.
  • Tick Silver-plated switch contacts.
  • Tick Large Cable Entry Protected Terminals (3.95mm dia)
£109.95

Finance Available

From £300, terms apply.

Free Delivery

On most UK orders
over £10

Showroom

Find out more about our fantastic demo facility.